[5/6, 9:16 PM] +234 905 626 6154: HOW TO MAKE LIQUID SOAP
[5/6, 9:18 PM] +234 905 626 6154: Nitrosol (or Antisol)…….……… 1/8kg
Caustic Soda…1/16kg
Soda Ash (Sodium carbonate) ,,..1/8 Kg
SLS (Sodium Lauryl Sulphate) ….1/8kg
Sulphonic Acid..1 ½ Ltr
STPP… 1/16Kg
Texapon .…1/8kg
Foam Booster……1/6 Ltr
Formalin…10Cl
Colour (As desired)
Glycerine (Optional)
Perfume (As desired)
Vitamin E (Optional
[5/6, 9:22 PM] +234 905 626 6154: Nitrosol serves as a thickener in the production of the liquid soap. It comes as a whitish substance and has the texture of a powdered milk. Nitrosol will dissolve immediately in water while antisol takes much longer time
[5/6, 9:22 PM] +234 905 626 6154: Caustic soda
is whitish crystalline substances that looks much like a sample of granulated sugar. It forms a strong base when dissolved in water and can be corrosive if in contact with the skin. It is an essential ingredient in the soap making process. This is the stain or dirt removing agent in the liquid soap.
[5/6, 9:22 PM] +234 905 626 6154: Soda Ash (Sodium carbonate):
This is also a whitish substance it serves to regulate the concentration of the Caustic Soda which ordinarily is corrosive to the skin. It helps to neutralize it.
[5/6, 9:22 PM] +234 905 626 6154: SLS (Sodium Lauryl Sulphate):
The SLS looks like rice grains and it’s whitish in colour too. It is some times referred to as rice chemicals
It is the main active foaming agent.
[5/6, 9:22 PM] +234 905 626 6154: Texapon
The Texapon is a pasty and jellylike substance, it also functions as a foaming agent and serves as foaming booster too. Many liquid soap producers don’t use Texapon and SLS together in same production; reason because both perform almost same function. They go with just one.
[5/6, 9:23 PM] +234 905 626 6154: Sulphonic Acid:
This is a dark looking liquid substance. It serves to boost the performance of the SLS, it is also a foaming and cleaning agent. Please the word spells S-U-L-P-H-O-N-I-C and not S-U-L-P-H-U-R-I-C. The latter is very strong acid and can be very corrosive.
please beware.
[5/6, 9:24 PM] +234 905 626 6154: STPP (Sodium Tripolyphosphate):
STPP is a sodium salt of triphosphoric acid. It has the appearance of white crystal powder and looks very much like a table salt. It is a strong cleaning agent too and helps the SLS to work on its full potential.
[5/6, 9:24 PM] +234 905 626 6154: Foaming booster
This also comes in liquid form and has transparent looks. As the name implies, it makes the liquid soap to foam very well.
[5/6, 9:25 PM] +234 905 626 6154: This is so very optional, it's better to make your soap without if self Formalin:
The preservative agent. It should be used if the soap is to be stored for a long time like six months, especially if one is producing for commercial purposes.
[5/6, 9:26 PM] +234 905 626 6154: Colour:
This normally comes as a powder and should be diluted with water before adding to the soap mixture. The colour adds beauty to the finished product. Most producers go with green colour.
[5/6, 9:26 PM] +234 905 626 6154: Glycerine:
Usually helps your skin to remain hydrated and soft after using the soap.
Perfume:
This gives your soap a sweet fragrance.
Vitamin E:
Offers a great deal of protection to the skin. E.g from damage, wrinkles etc.
[5/6, 9:26 PM] +234 905 626 6154: But they are optional as well
[5/6, 9:27 PM] +234 905 626 6154: OTHER REQUIREMENTS
A big mixing bowl
Containers
Wooden spoon or stick for stirring
A pair of Scissors
Spoon
Measurement bowl or container
Hand glove
Nose mask
Rubber gloves
[5/6, 9:29 PM] +234 905 626 6154: PROCEDURE
One really needs a great deal of patience during stirring to make sure any chemical added in any stage dissolves properly before adding the next one
For smaller volume production, eg 8litres or 10litres. follow same process but work on your ratios. The vendors selling these chemicals usually sell them already measured according to the volume of liquid soap to be produced.
Just tell them how much volume you want to produce and they will give you the quantity of chemicals you require.
Measure out about 20 litres of water;
Ferment the Caustic Soda before production process by dissolving with 1 litre of water and allowing for 24 hours or overnight. Please keep all chemicals out of reach of children. Caustic soda is corrosive to the skin.
Dissolve the Soda Ash as above (i.e with 1 litre of water and keep overnight for fermentation to take place)
Dissolve the Nitrosol with 10 litres of water in a bigger mixing bowl just before production. In case you want to opt for Antisol in preference to Nitrosol, dissolve in same amount of water and let it stay for at least 24-48 hours before production.
[5/6, 9:30 PM] +234 905 626 6154: Note: this should be properly dissolved and will look like ‘starchy solution’ at the end.
Dissolve the SLS (Sodium Lauryl Sulphate) in 1 litre of water to produce a clear solution before production; keep it aside.
This should be done at least one hour before production. If you want it to dissolve well, dissolve in water and leave over night.
Dissolve the STPP (Sodium Tripolyphosphate) in 1 litre of water before production and keep aside too. (Some people don’t use STPP for whatever reasons best known to them)
Mix the Texapon and Sulphonic Acid together. Mix very well and dissolve further with 2 litres of water.
Stirring should be done gently until mixture is well dissolved and homogenous.
[5/6, 9:31 PM] +234 905 626 6154: Dissolve the powdered colour with small quantity of water and keep aside.
Gently pour the dissolved mixture of Sulponic Acid and Texapon into the mixing bowl containing dissolved Nitrosol(or Antisol}. Stir very well and gently until mixture becomes homogenous.
You need patience here.
Add the dissolved Caustic Soda into the mixing bowl above and stir very well.
Add the dissolved Soda Ash next and stir very well until even.
Next, add the STPP and stir properly
Add the Dissolved SLS and stir more.
Add Foam Booster to make it foam very well.
Add your Formalin and keep stirring
Vitamin E and Glycerine can be added at this point. Dont forget to stir and stir.
Finally, allow the lather formed to disappear, then add the dissolved colour
Now add the remaining water. Do this gradually, small quantity at a time, stir each time and pay close watch on the thickness until the desired is attained.
[5/6, 9:33 PM] +234 905 626 6154: perfume is the last thing to add and stir properlythen cover immediately to avoid the scent from escaping
Your liquid soap is ready
[5/6, 9:33 PM] +234 905 626 6154: To make GERMICIDE (IZAL)
[5/6, 9:35 PM] +234 905 626 6154: THINGSNEEDED
* 2Tin Milk Cups of * Texapon
* 4Tin Milk Cups of * PineOil
* 4Tin Milk Cups of * Phenol
* 4Tin Milk Cups of Lysol
* 4Tin Milk Cups of Izal booster
* 4Tin Milk Cups of Carbolic Acid
* 4Tin Milk Cups of Izal concentrate
* 2Tin Milk cups of whitener
* 5Litres of Water
[5/6, 9:35 PM] +234 905 626 6154: Going by these standard mixing ratios for the germicide components, your yield after production
will be a total of 10litres of Izal.
[5/6, 9:35 PM] +234 905 626 6154: PROCEDURE
1•Get a big mixing container and pour your texapon into it.
2•add the Pine Oil to the container and stir it thoroughly.
3•Add the Phenol also and stir the mixture as much as you can.
4•Now,add Lyzol into the bowl and stir it properly.
5•Get your izal booster, add it to the mixture and also stir it to distribute evenly
6•At this point, add 3litres of water into the container and stir it very well
7•Dilute the Carbolic acid with water inside a separate container. Then,add it to the main
container gradually and carefully too.
Remember that you are dealing with acids.
Also,stir the
mixture as you do so.
8•Gently pour your Izal concentrate into the mixture and turn it as proper.
9•Put your Whitener into a separate bowl and dissolve it inside the container with water.
[5/6, 9:36 PM] +234 905 626 6154: Then add it to the main mixture and stir carefully.
10•Now,add the remaining water into the mixture and properly stir all the contents together to
achieve an optimum mix.
11•Measure it into your well-designed and branded containers which you can either
gather on your own and attach your attractive stickers to their surfaces.
[5/6, 9:37 PM] +234 905 626 6154: HOW TO MAKE TOILETWASH (herpic)
INGREDIENTS
* Hydrochloric Acid(Raw)
* Soda Ash
* SulphoricAcid
* Texapon
Chemicals Needed With Measurements
1.Water 15Liters
2.Natrozol 1/3kg
3.Caustic soda 1/2kg
4.Soda ash1/2kg
5.Texapon1kg
6.Surphonic Acid1Liters
7.HCL2Liters
[5/6, 9:39 PM] +234 905 626 6154: Preparation
1.Mix Texapon in 2liters of water and mix well
2.Pour in your HCL and continue turning for like 20minutes
3.Add Sulphoric Acid and keep turning for the whole mixture to mix well
4.Allow to settle,then package.
Primary Agents Are:
*Water
*HCL is the most important of them all and it should be in large quantity.
HCL,helps to clean
and kill germs.
*Caustic Soda this helps the products to clean.
*Soda Ash this helps the products to clean.
When I say PRIMARY:I mean without these agents;no productions!
Secondary AgentsAre:
*Natrozol this helps the products to foam
*Surphonic Acid and Texapon helps the products to thicken.
*However,if you do not add thes econdary agents above; your production may be watery! This is
due to the chemical reaction of HCL.
*Mind you, it is important you know that you can also make use of BAKING SODA if you wish.
The baking soda should be added to water immediately after Natrozol.
The Baking Soda should
also be1/2kg!
[5/6, 9:39 PM] +234 905 626 6154: Please keep chemicals out of reach of children 🙏🏼🙏🏼🙏🏼🙏🏼
[5/6, 9:40 PM] +234 905 626 6154: Scouring powder production
INGREDIENTS NEEDED
1.Sodium bicarbonate 1/2kg
2.Sodium laurie sulphate(SLS) 2-3spoons
3.Calcium carbonate 1/2kg
4.Caustic soda 1-2spoon(s)
5.Soda ash 1/2kg
6.Fragrance optional(as desired)
[5/6, 9:41 PM] +234 905 626 6154: Some of us might be scared of these names, but don't be you can readily get them at the chemical shops
[5/6, 9:41 PM] +234 905 626 6154: PROCEDURE:
1.Pour the bicarbonate in an open bowl
2.Add the calcium and stir
3.Add the soda ash and stir very well
4.Add the SLS and stir properly
5.Add the caustic soda and stir vigorously
6.Add the fragrance and stir properly and ensure everything is blended or well mixed together.
7.Finally, package the product for use or sale
[5/6, 9:43 PM] +234 905 626 6154: Bleach production
THINGS NEEDED
* Caustic soda 1/2cup
* Soda ash1cup
* Chlorine 1cup
* Water 5litres
APPARATUS NEEDED
Facemask
Longsleeves
Hhandglooves
Wooden turner
2 Medium bowls
[5/6, 9:43 PM] +234 905 626 6154: PROCEDURES
1.Get a clean container and add clean water into it.
2.Dilute caustic soda in the water (Mix ingredients in an open environment to avoid inhalation
of toxic fumes and wear gloves and protective clothings while mixing bleach).
3.Add soda ash and mix gently
4.Measure chlorine and add.
Stir till you achieve a homogenous mixture (chlorine and caustic
soda solution will react to form hypochlorites bleach.
5.When that is achieved, cover and keep for 24hours for the liquid to clearly separate from
suspended particles.
6.Decant to remove impurities then package into different plastic containers with fitted lids for
home use or for sale.
Note:Hydrogen peroxides can be used in place of sodium hypochlorite(non toxic bleach) to be
on the safer side
[5/6, 9:44 PM] +234 905 626 6154: MAKING BALM (Robb)
TOOLS NEEDED FOR MAKING BALM
1.Heater
2.Boiler
3.Stirrer
4.Weighing Scale
INGREDIENTS
1.Petroleum jelly1k
2.Paraffin Wax 100grams
3.Menthol 50grams
4.Pepper mint oil50grams
5.Methy salicylate 100grams
6.Turpentine oil 100grams
7.Camphor rectified 150grams
[5/6, 9:45 PM] +234 905 626 6154: STEPS iNVOLVED IN MAKING BALM
Turn on the heater and set the boiler on it
Add the petroleum jelly into the boiler and heat for about 5mins
Add the paraffin wax and stir the two together until they are uniformly mixed
Add the turpentine oil and the pepper mint oil and continue stirring
Next add the methyl salicylate, Eucalyptus and tincture of capsicum continue with the
stirring
Finally add the camphor and the menthol,heat and stir for another 2minutes
Turn off the heater and continue stirring
Package ready for sale
[5/6, 9:56 PM] +234 905 626 6154: VASELINE PRODUCTION
INGREDIENTS
•30 Centilitre(cl) of Paraffin oil or mineral oil
•1Kg of petroleum jelly
1Tablespoonful of Lanolin
•A sufficient quantity of Industrial perfume.
[5/6, 9:56 PM] +234 905 626 6154: PROCEDURE
[5/6, 9:57 PM] +234 905 626 6154: •Get a big-sized container or a pot and pour your 30Cl of paraffin oil or mineral oil into it.
•Add 1Kg of the petroleum jelly and stir it properly.
[5/6, 9:58 PM] +234 905 626 6154: •Also,Add 1table spoonful of the Lanolin substance and heat it moderately so as to
dissolve it properly and proportionately.
•As it melts, consider adding more 20Cl of paraffin or mineral oil if the mixture is still stiff or
too thick inside the pot.
This is where you will decide the quantity and quality of your product.
But if it is not too thick then,there is no need for you to add extra paraffin oil otherwise,your
final product will not be too jelly in nature just as an ideal vaseline is expected to be.
The more
paraffin oil you add,the more you loose the thickness of your product.
So beware of
this so as not to produce a sub-standard vaseline.
•As soon as the melting and mixing process has been completed, get your pot out of the
heat and wait for a few seconds for it to cool.
Then,add your industrial perfume according to your desire .
•Now,stir the mixture well so that the components can properly mixup with eachother.
•After that, pour the mixture into your well-designed and branded packaging containers. Allow it
to cool inside the. Containers for a few minutes and then,you have just produced your vaseline.
[5/6, 10:00 PM] +234 905 626 6154: Lanolin is a moisturizer, which means it has the ability to slow water loss from the skin.
[5/6, 10:00 PM] +234 905 626 6154: It is also known for anti aging benefits
[5/7, 10:26 AM] +234 905 626 6154: This is also very simple and easy to make
[5/7, 10:26 AM] +234 905 626 6154: HOW TO MAKE AIR FRESHNER
Ingredients
1.Industrial perfume
2.Camphor
3.Water
4.SLS[Sodium Laurel Sulphate]
5.Texapon
6.Methanol
[5/7, 10:27 AM] +234 905 626 6154: Procedures:
1.Mix the perfume with SLS
2.Dissolve the Camphor in methanol
3.Pour in the Perfume and shakevery well
4.Add 4-litres of water and stir vigorously
5.Package your Airfreshener as desired
[5/7, 10:30 AM] +234 905 626 6154: How to make dettol
Ingredients
1.Pineoil
2.Phenol
3.Texapon
4.Chlorozanol
5.Water
6.IPA
7.Dettol colour
[5/7, 10:30 AM] +234 905 626 6154: To produce 5ltrs of Dettol you will need:
1.½liter of pine oil
2.1/8 of phenol
3.¼kg of texapon
4.¼liters of chlorozanol
5.2liters of water
6.2liters of IPA
7.Dettol colour
[5/7, 10:31 AM] +234 905 626 6154: PROCEDURE
1.Put pineoil into a container (preferably plastic bucket)
2.Add phenol and mix
3.Add texapon and mix all very well
4.Then add chlorozanol and mix very well
5.Add water and stir very well
6.Add IPA and stir very well
7.Add Dettol colour 1cap stir very well and allow for 1hour before use
[5/7, 10:31 AM] +234 905 626 6154: Note : if you want the colour of your dettol to look exactly like the dettolsold in the market then you add methanol.
Methanol is what gives it the perfect dettol colour
[5/7, 9:30 PM] +234 905 626 6154: HOW TO MAKE PINK LIP👄 BALM
*Ingredients Needed*
-½ teaspoon of shea butter
-1 tablespoon of beetroot powder
-3 drops Vit E
-½ teaspoon of beewax
-Pinch of cinnamon powder
-1 tablespoon of sweet Almond oil
Procedure
1. Do your double boiler (place a small pot inside a bigger pot filled with little water)
2. Add Shea butter, beewax and almond oil
3. Allow them to melt.
4. bring it down from the heat.
5. Add vitamin E, beetroot powder
and cinnamon powder
6. Stir very well
Then pour into a container.
7. Apply on lips daily.
No comments:
Post a Comment